Schedule Video Recording - D-Link DCS-3420 - Wireless Day And Night Internet Camera Network User Manual

Section 3 - Configuration
To schedule video recording with motion detection, you must first enable motion detection on the Internet Camera. Click
the Motion Detection button under the Advanced tab from the Configuration screen to access settings that affect how
the DCS-3420 Internet Camera can serve as a security device by recording only when motion is detected.
Note: These settings can be configured in your Web
browser and while logged into the IP surveillance
Program.
In this window, follow the steps below to ensure that
motion detection is correctly enabled:
1 Check "Enable motion detection."
2 Click on "New" to have a new window to monitor
video.
3 Enter in a window name.
4 Adjust the "Sensitivity" and "Percentage" levels according to the local environment. The highest sensitivity and
lowest percentage provides the most sensitive setting.
5 After adding the motion window, click on save to enable the activity display. You can add up to 3 motion windows
to trigger recording.
D-Link DCS-340 User Manual

Schedule Video Recording

118