Alarms; Alarm Codes - Estyma iGNEO COMPACT User Manual

6 Main menu

6.7 Alarms

This menu contains a history of up to 20 alarms that occurred during the controller work. The
importance of alarm codes was presented in table below.

6.7.1 Alarm codes

ALARM CODES AND THEIR SIGNIFICANCE
CODE Short description
1 Processor overheating
2 No fire / fuel
3 Burner overheating
4 Boiler sensor shorted
5 Boiler sensor open
6 Burner sensor shorted
7 Burner sensor open
page 40
PL20110629
Procesor overheating. The reason may be improper
installation location of the controller.
The controller detected a lack of flame in the burner.
The reason could be the end of the fuel or the flame
goes out.
The temperature of the burner has reached its
maximum value!
The controller detected shorted boiler temperature
sensor. The reason may be damaged sensor or
connection cable.
The controller detected open boiler temperature
sensor. The reason may be damaged sensor or
connection cable.
The controller detected shorted burner temperature
sensor. The reason may be damaged sensor or
connection cable.
The controller detected open burner temperature
sensor. The reason may be damaged sensor or
connection cable.
Explanation