Replacing The Fuses - Yamaha XJR1300 Owner's Manual

Periodic maintenance and adjustment
key is turned to "OFF", then
connect the positive lead before
connecting the negative lead.
[ECA16841]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
6

Replacing the fuses

The main fuse is located under the
seat. (See page 3-15.)
ECA16531
1
1. Main fuse
The fuse box, which contains the fuses
for the individual circuits, is located be-
hind panel B. (See page 6-8.)
6-29
EAU43274
1 2 3 4 5 6
7
1. Headlight fuse
2. Signaling system fuse
3. Ignition fuse
4. Taillight fuse
5. Fuel injection system fuse
6. Backup fuse (for clock and immobilizer sys-
tem)
7. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]