Periodic maintenance and adjustment
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
6
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing a license plate light
1
bulb
1. Remove the reflector by removing
1. Reflector
2. Nut
2. Remove the license plate bracket
[ECA11192]
6-33
the nut.
2
by removing the bolts and collars.
EAU65451
1