1
1. Cover
3. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
Periodic maintenance and adjustment
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with
the bulb) by pushing it in.
7. Install the cover in its original posi-
tion.
8. Install the headlight unit by install-
ing the screws.
6-32
Brake/tail light
This model is equipped with an LED-
type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
EAU70540
6