Programmable Features - Excalibur RS-340-EDP+ Installation Manual

Deluxe keyless entry & remote start

Hide thumbs Also See for RS-340-EDP+:

Operation manual (16 pages)

Table Of Contents

Table of Contents

A matrix of all programmable features and their options are below� For detailed

information on each feature, please refer to the operation manual� Use the proce-

dure below to make any necessary changes� Feature programming can also be

performed via the OL-LOADER using www�omegaweblink�com�

Step 1 Turn the ignition key "ON", then "OFF"

Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user features (Press

10 times to access installer features)� ~ The horn will honk and the status light will turn on�

Step 3 Within 10 seconds of step 2, press the valet switch the number of times corresponding

with the desired feature's number� ~ The horn will honk, the status lights, and the parking lights

will flash equal to the selected feature.

Step 4 Change the feature by pressing the transmitter button that corresponds with

the desired setting. ~ The horn will honk, the status lights, and the parking lights will flash equal to

the selected setting�

Step 5 If you wish to change more features, repeat steps 3 & 4 at this time�

Step 6 To exit programming, turn the ignition key "ON" then "OFF"� Or, you can wait 10 seconds

for programming mode to expire�

User Feature Programming: Ignition on, off, press valet 5 times

# Feature

1 Engine Run Time

2 RS Light Confirmation

3 Horn Honk Volume

4 Pulse Horn/Steady Siren

5 Lock w/ IGN on

6 Unlock w/ IGN Off

7 Unlock w/ Trunk release

Installer Feature Programming: Ignition on, off, press valet 10 times

1 Remote Start Activation

2 PINK/WHITE Wire Function

3 Engine Detection

4 Gas or Diesel Engine

5 Sat. Port Green Wire Function

6 Sat. Port Blue Wire Function

7 Crank Time

8 Low Temp Crank Extender

9 Door lock outputs

10 Remote Start Lock Control

11 Turbo Timer

12 Manual Transmission

13 Data Port Protocol