Toro 79366 Operator's Manual page 17

POTENTIAL HAZARD
The snowthrower frame assembly is heavy.
WHAT CAN HAPPEN
Hands and feet can be injured by the
weight of the snowthrower coming down on
them.
HOW TO AVOID THE HAZARD
Keep hands and feet away from the
underside of the snowthrower frame.
3
2
1
Figure 31
Right side of tractor shown
1. Snowthrower frame
2. Mid Attach-A-Matic hitch
lever
11. Put the tractor's High–Low range lever in neutral
"N" and release the parking brake.
12. Push the tractor back, away from the
snowthrower until there is sufficient space to
remove the pulley box.
13. Remove the "C" shaped pins from the pulley
box locking holes (Fig. 32). Open the latches of
the front Attach-A-Matic
pulley box, and slide it into snowthrower frame.
m–3707
3. Mid Attach-A-Matic
hitch button
hitch, remove the
14. Install the "C" shaped pins into the locking holes
of the pulley box for storage. Retain with the
hairpin cotters.
1
3
Figure 32
1. Attach–A–Matic hitch
latches
15. Push the tractor back, away from the
snowthrower frame. Set the parking brake.
Installation
2
m–4344
2. Pulley box
3. Locking holes
15