Toro 79366 Operator's Manual page 23

Where to Add Grease
1. Lubricate the jack shaft bearings (Fig. 37) and
drive bearings (Fig. 38).
Figure 37
Figure 38
Oil the Drive Chain
1. Disengage the power take off (PTO), set the
parking brake, lower the attachment lift, and turn
the ignition key to "STOP" to stop the engine.
Remove the key.
2. Coat the entire chain with oil and allow it to
penetrate each roller (Fig. 39).
3. Place a few drops of oil on the discharge chute
rotator shaft and discharge chute mounting
(Fig. 40).
4. Wipe off excess oil.
m–3737
m–3723
Maintenance
Figure 39
Figure 40
m–3723
m–3732
21