Table of Contents
Advertisement
the motorcycle will decelerate
only to the cruising speed saved
in memory, even though you
might have intended slowing to
a lower speed.
Telltale light for cruise con-
trol shows.
Switching off cruise
control
Slide switch 1 to the left.
The system is deactivated.
Button 2 is disabled.
Spring preload
Setting
It is essential to set spring pre-
load of the rear suspension to
suit the load carried by the mo-
torcycle. Increase spring pre-
load when the vehicle is heavily
loaded and reduce spring preload
accordingly when the vehicle is
lightly loaded.
Adjusting spring preload
for rear wheel
WARNING
Adjusting spring preload
while riding.
Risk of accident
Do not attempt to adjust spring
preload unless the motorcycle
is at a standstill.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
WARNING
Spring preload setting and
spring-strut damping setting
not matched.
Impaired handling.
Adjust spring-strut damping to
suit spring preload.
If you want to increase spring
preload, turn knob 1 in the dir-
ection indicated by the HIGH
arrow.
If you want to reduce spring
preload, turn knob 1 in the dir-
ection indicated by the LOW
arrow.
4
73
z
Advertisement
Table of Contents
