Table of Contents
Advertisement
running light makes the vehicle
more visible to oncoming traffic.
This improves daytime visibility.
Start engine (
89).
SETUP
In the display's
DLIGHT
go to the
and set the automatic daytime
OFF
riding light to
.
Press button 1 to switch on
the daytime riding light.
The indicator light for the
daytime riding light illumin-
ates.
The low-beam headlight, the
front side lights and the auxili-
ary headlight are switched off.
In the dark or in tunnels: Press
button 1 again to switch off the
menu,
daytime riding light and switch
menu item
on the low-beam headlight.
The auxiliary headlight is also
switched on again.
NOTICE
If the high beam headlight
is switched on whilst the
daytime riding light is switched
on, the daytime riding light
will be switched off after
approx. 2 seconds, and the
high beam headlight, low beam
headlight, front side lights and, if
applicable, the auxiliary headlights
will be switched on.
If the high beam headlight is
switched off again, the daytime
riding light is not automatically
reactivated, but must be
switched on again if required.
Automatic daytime riding
light
NOTICE
The changeover between day-
time riding light and low beam
headlight incl. front side lights
can be effected automatically.
WARNING
The automatic riding light
control system cannot re-
place your personal assess-
ment of lighting conditions,
particularly in foggy or misty
weather.
Safety risk
Manually switch on the low-
beam headlight in poor lighting
conditions.
SETUP
In the
menu of the
display, at the menu item
DLIGHT
set the automatic
daytime riding light to
4
63
z
ON
.
Advertisement
Table of Contents
