Hazard Warning Flashers; Bmw Motorrad Integral Abs; Ral Abs - BMW R 1200GS Rider's Manual

Hazard warning
flashers
Operating hazard warning
flashers
Switching on ignition (
NOTICE
The hazard warning flashers
place a strain on the battery.
Do not use the hazard warning
flashers for longer than absolutely
necessary.
Press button 1 to switch on
the hazard warning flashers.
Ignition can be switched off.
To switch off the hazard warn-
ing flashers, switch on the ig-
nition if necessary and press
button 1 again.
45).
BMW Motorrad
Integral ABS
Deactivating the ABS
function
Switching on ignition (
Press and hold down button 1
until the ABS warning light
changes status.
Initially, the ASC symbol
changes status. Press and hold
down button 1 until the ABS
warning light responds. Under
these circumstances, there is
no change in the ASC setting.
ABS warning light flashes.
Release button 1 within two
seconds.
ABS warning light contin-
45).
ues to flash.
The ABS function is deactiv-
ated, but the integral function
remains active.
4
65
z