Table of Contents
Advertisement
Pull the glass out of the light
housing at the threaded-
fastener side.
Turn bulb 1 counter-clockwise
and remove it from the light
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED turn indicators
LED
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of foreign matter.
OE
Turn bulb 1 clockwise to install
it in the light housing.
OE
Working from the inboard side,
insert the glass into the light
housing and close the housing.
7
137
z
Advertisement
Table of Contents
