7
128
Remove screw 1.
Remove left-hand axle clamp-
ing screw 2.
Press quick-release axle slightly
z
toward the inside, so as to be
better able to grip it on the
right-hand side.
Withdraw quick-release axle 1,
support the front wheel when
doing this.
Set down front wheel and
roll forwards out of the front
suspension.
Remove spacer bush 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and ASC.
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.