Table of Contents
Advertisement
4
82
Use vehicle key to turn seat
lock 1 to the left and hold, sup-
portingly press down the rider's
z
seat in the rear area 2.
Lift the front seat at the rear
and release the key.
Remove the front seat and
place it, upholstered side down,
on a clean surface.
Adjusting height and
angle of tilt of front seat
Remove front seat (
In order to remove the front
height adjustment 1, press
down locking mechanism 2
and remove height adjustment
in an upward direction.
81).
In order to set the low seat po-
sition, install front height ad-
justment in the alignment 1
(identification L).
In order to set the high seat
position, install front height
adjustment in the direction 2
(identification H).
Initially push front height ad-
justment under the mount-
ings 1, subsequently press into
the locking mechanism 2 until
the same engages.
Advertisement
Table of Contents
