Table of Contents
Advertisement
Top up the engine oil
7
Make sure the ground is level
and firm and place the motor-
118
cycle on its stand.
z
Wipe the area around the oil
filler neck clean.
Insert Torx end of reversible
screwdriver insert 1 into screw-
driver handle 2 (on-board tool-
kit) for additional leverage.
Engage this tool in cap 3 of
the oil filler neck and turn
counter-clockwise to remove.
Check engine oil level (
ATTENTION
Not enough or too much en-
gine oil.
Engine damage
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Engine oil, quantity for
topping up
max 0.95 l (Difference
between MIN and MAX)
Check engine oil level (
Install cap 3 of the oil filler
neck.
Brake system
Check operation of brakes
Pull the front brake lever.
The pressure point must be
117).
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
If pressure points are not clearly
perceptible:
ATTENTION
Work on brake system not
in compliance with correct
procedure.
Risk to operational reliability of
the brake system.
Have all work on the brake sys-
tem undertaken by trained and
qualified specialists.
Have the brakes checked by a
117).
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking front brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Advertisement
Table of Contents
