Table of Contents
Advertisement
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten screws 1.
ATTENTION
Centre stand retracts if mo-
torcycle lifted too high.
Risk of damage to parts if vehicle
topples.
When raising the vehicle, make
sure that the centre stand re-
mains on the ground.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
Lighting
Replacing bulbs for low-
beam and high-beam
headlight
without LED headlights
NOTICE
The positions of the plug, the
spring wire retainer and the
bulb might not be as illustrated
below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
7
133
OE
z
Advertisement
Table of Contents
