Table of Contents
Advertisement
L
Note:
Note the installed position of
the ABS sensor ring
rection-of-rotation arrow on the
tyre.
e
Attention:
Do not damage the brake disc
or pads when fitting the wheel.
Motorcycle equipped
OE
with ABS
:
Do not damage the ABS sensor
cable, the ABS sensor ring and
the ABS sensor.
• Roll the front wheel between
the forks and carefully posi-
tion the brake disc in the
brake caliper.
OE
Optional extra
Installing the front wheel
7
• Clean and grease spacer
OE
or the di-
• Clean quick-release axle 2,
• Insert ABS sensor
• Insert spacer 7 (if originally fit-
• Install securing screw 6 and
5
6
bushing 1 and spacer 4 and
insert them into the wheel
hub.
As viewed in forward direction
of travel:
– left: spacer 4 on
right: spacer bushing 1 with
collar toward the wheel hub
grease it and insert it from the
right (raising the wheel slightly
as necessary) and hand-
tighten
approx. 2/3 of its length are
inside the bore
ted)
tighten to specified torque
2
23
OE
5 until
Advertisement
Table of Contents
