Miscellaneous; Restore Factory Settings; Erase Transaction Log; Section 2.8 Miscellaneous - DKS 1812 Access Plus Installation & Owner's Manual

2.8 Miscellaneous

2.8.1 Restore Factory Settings

This step will restore the factory settings for each of the programming parameters. See the "Quick Reference Table" on
page 31 for all of the factory settings. The master code (2.1) will remain intact after the factory settings have been restored.
WARNING: Once started, this sequence will program all values to factory settings.
1. Press
2. Press 9 9 9 9, then press
3. The programming sequence will end itself automatically. [beeeeeep]

2.8.2 Erase Transaction Log

This step will erase (empty) the transactions stored in the system history buffer (the system stores up to 500 transactions).
WARNING: Transaction log cannot be recovered after this sequence is started.
1. Press
2. Press 9 9 9 9, then press
3. The programming sequence will end itself automatically. [beeeeeep]
40
9 0 and enter the MASTER CODE. [
*
. [ 9 9 9 9 (beep)]
*
9 1 and enter the MASTER CODE. [
*
. [ 9 9 9 9 (beep)]
*
9 0 _ _ _ _ (beep)]
*
9 1 _ _ _ _ (beep)]
*
1812-162-V-5-16