Time Functions; Time And Date Calendar Chip Programming; Call Forward Phone Number Programming; Call Forward - On/Off Or Time Zone Activation - DKS 1812 Access Plus Installation & Owner's Manual

2.7 Time Functions

2.7.1 Time and Date Calendar Chip Programming

This programming sequence programs the calendar chip in the 1812 system for the current time and date. The calendar
chip must be programmed if any of the time related features are going to be used.
Note: The clock / calendar chip in the 1812 Access Plus will keep time for approximately 48 hours if power to the system is
lost or removed. If power is off longer than this, the clock / calendar chip will have to be reprogrammed.
1. Press
2. Enter the current hour (01 to 12) and minutes (01 to 59), then press
3. Press 0
4. Enter the month (01 to 12), day of the month (01 to 31) and the year (00 to 99), then press
5. Enter the day of the week (1-7), then press
6. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
Example: Saturday, February 14th, 2010, 11:30 AM.

2.7.2 Call Forward Phone Number Programming

These steps program the call forward telephone number into the 1812 memory. Call forward can only be used when the
1812 is programmed in phone mode (see 2.4.1). To turn ON/OFF or setup a time zone activation for the call forward see
2.7.3 below.
1. Press
2. Enter the phone number where calls from the 1812 are to be forwarded to (up to 20 digits, no dashes),
All 20 spaces do not have to be populated with numbers.
3. Press 0 # TOGETHER to end. [0 # (beeeeeep)]

2.7.3 Call Forward - ON/OFF or Time Zone Activation

This programming sequence turns the call forward feature ON/OFF or setup a time zone activation. You must have a
call forward phone number programmed into the 1812 memory (See 2.7.2).
1. Press
2. Press 0
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
4. Press 0
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
6. Press 0
7. Enter the days of the week that the call forward time zone is to be active, then press
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
38
3 3 and enter the MASTER CODE. [
*
for AM OR press 1
*
[ _ _ _ _ _ _ (beep)]
*
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
1 0 and enter the MASTER CODE. [
*
then press . [ _ _ _ _ _ _ _ _ _ _ _
*
3 7 and enter the MASTER CODE. [
*
to turn call forward OFF, OR press 1
*
forward per the call forward time zone. [ _
You can terminate here (Go to step 8 to finish) if you have previously programmed the time zone
and only ON / OFF or Call Forward per the time zone is desired.
for AM OR press 1
*
for AM OR press 1
*
[ _ _ _ _ _ _ _ (beep)]
*
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the call forward to be active only on Saturdays and Sundays, enter 1 7
The order of the numbers is not important; 17 is the same as 71.
3 3 _ _ _ _ (beep)]
*
for PM. [ _ (beep)]
* *
. [ _ (beep)]
* *
Your Master Code - 1.
Time - 2. 1 1 3 0
AM - 3. 0
Date - 4. 0 2 1 4 1 0
Day - 5. 7
End Programming - 6. 0 # TOGETHER (beeeeeep)
1 0 _ _ _ _ (beep)]
*
(beep)]
*
3 7 _ _ _ _ (beep)]
*
to always call forward, OR press 2
*
(beep)]
*
for PM. [ _ (beep)]
* *
for PM. [ _ (beep)]
* *
. [ _ _ _ _ (beep)]
* *
3 3 _ _ _ _ (beep)
*
(beep)
*
(beep)
*
(beep)
*
(beep)
*
. [ _ _ _ _
*
. [ _ _ _ _ (beep)]
* *
.
*
to call
*
(beep)]
*
.
*
.
*
1812-162-V-5-16