Housing Hand Grip Strap - Fantasea Line FG9X Instruction Manual

HOUSING HAND GRIP STRAP

The FG9X Housing features two hand strap loops on the "latch" side of the housing, which enable the
attachment of an optional hand grip strap for the housing in order to improve hand grip, especially when
using the housing during extreme sports activities.
Installing the Fantasea Hand Strap (Cat. No. 11188) on the Housing
1. Pull the narrow nylon Velcro strip through top of lower housing ring (below the locking latch) in a
downward direction to the end of the strip (figure #25 and #26).
2. Place the wide flat Velcro mid-section over the locking latch and pull the thin Velcro strip over the top
of this mid-section and through the upper housing ring from bottom to top all the way through (figure
#27).
3. Double back the thin nylon Velcro strip and secure it tight to the top of the Velcro strip previously
inserted (same strip) and press down. Then cover with the wide flap (should be on the right side) over
the thin Velcro strips (figure #28).
www.fantasea.com | www.canondive.com
Figure #25
Figure #27
30
Figure #26
Figure #28
FG9X Housing Instruction Manual 20160409