Fantasea Line FG9X Instruction Manual page 11

15. Menu - Pushing this control activates the camera menu button.
a. For easy access to commonly used shooting menu items, a customizable menu ("My Menu")
can be setup prior to installing the camera inside the housing. This will allow accessing these
menu items quickly from a single screen.
b. To customize "My Menu", push Menu  My Menu  My Menu Settings. Select the items
you would like to be included in this menu and then select "Set default view"  Yes. This will
ensure that this menu is the default screen which appears first once pushing the "Menu"
button.
c. It is recommended to include in "My Menu" items that aren't accessible or only partly
accessible through the Quick Set Menu. For instance, White Balance, WB Correction and any
settings you've left out of the 4 settings that are accessed through the Quick Set Menu using
the Touch Screen controls on the housing.
16. INFO – Pushing this control activates the INFO button on the camera.
a. In shooting mode, pushing the INFO button scrolls between the various information screens.
The information displayed once the INFO button is pushed in shooting mode can be
customized by pushing Menu  Shooting Menu  Page 1  Shooting information display.
b. In playback mode, pushing the INFO button scrolls between the various screens of
information provided for the previewed image or video file.
17. Touch-Screen Controls – The 5 Touch-Screen Controls were designed based on a new touch screen
technology and provide access to essential contact points on the camera touch screen. For useful
tips, recommended camera settings and helpful Touch Screen Controls guidelines, please refer to the
"Touch Screen Controls Friendly Guidelines" section.
Important Notice- If wearing gloves, Touch-Screen Controls will respond underwater, but will
respond in a dry environment only if the material the glove is made of is conductive.
18. Anti-Glare Hood for LCD - The anti-glare hood enables a better view of the LCD screen when shooting
in bright conditions. It can be removed and installed during the dive. For further instructions, refer to
the section "Preparing the Housing". Note that the Anti-Glare Hood must be attached with a secure
line to the lower left housing loop (from back view) so it does not float away if mistakenly pulled off.
19. Flash Pop-Up - Turning this control counterclockwise pops up the camera built-in flash.
Note that once the camera built-in flash has been popped up, it can only be disabled by using the
Flash Push-Down Lever (no. 5) or through camera menus. Turning the Flash Pop-Up control clockwise
will not have any effect on the built-in flash.
www.fantasea.com | www.canondive.com
FG9X Housing Instruction Manual 20160409
11