Table of Contents
Advertisement
User Manual of DS-6600 Audio/Video Encoder
Chapter 9 Record Settings
Before you start
Make sure the Encoder is connected with HDD (for DS-6600HFI/HCI-SATA) or network disk, and the HDD or
network disk has been initialized for the first time to use. Please refer to Section 7.3.5 Adding Network Disk for
details.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording. For the manual recording, refer to Section 6.1 Starting Live View.
Steps:
1.
Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of Enable Schedule to enable recording schedule.
4.
Choose the day in a week to configure scheduled recording.
5.
Click Edit to edit record schedule.
Figure 9.1 RS-485 Port Settings
68
Advertisement
Table of Contents
