User Manual of DS-6600 Audio/Video Encoder
4.
When the SNMPv3 is enabled, you can configure the read username (default: public).
Note:
By default settings, the SNMPv1, SNMP v2c and SNMPv3 are disabled.
Select the security level to "no auth, no priv", "auth, no priv", "no auth, priv" or "auth, priv".
5.
(1) When the security level is set to "auth, priv", you can configure the Authentication Algorithm and
6.
Privacy Algorithm parameters.
(2) When the security level is set to "no auth, no priv", you cannot configure the Authentication Algorithm
Figure 7.21 SNMP Settings (1)
Figure 7.22 SNMP Settings (2)
51