User Manual of DS-6600 Audio/Video Encoder
3.
Enter admin user account.
(1) Type "su admin" and press "Enter".
(2) Input the password (default: 12345) of the admin user account.
(3) Press "Enter" to have the symbol "#"on the interface which indicates the current login user is admin.
4.
Type the commands described in Table 3.1 to configure the parameters of the device.
The admin and guest have different permission to use commands. Please refer to the following table:
Command
guest
√
helpm
√
getIp
setIp
×
√
getPort
setPort
×
Figure 3.6 Enter guest User Account
Figure 3.7 Enter admin User Account
Table 3.1 Description of Commands
admin
Description
√
Console help command is used to print common commands
Get the current IP address of the device. Command format:
√
getIp + "Enter".
Set IP address.
√
Command format: setIp IP: mask, e.g., setIp
192..168.1.11:255.255.255.0
Get data port of the current video server. Command format:
√
getPort+ "Enter".
Get data port of the video server. Default port: 8000,
√
command format: getPort+Port No., e.g., setPort 9000.
21