Table of Contents
Advertisement
Operation Mode Setup
You can setup different modes to LAN and WLAN interface for
NAT function.
Gateway
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in four LAN
ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using PPPoE,
DHCP client, PPTP client, L2TP client or static IP.
To change the Operation Mode:
1. From the left-hand menu, click on Wizard. The following
page is displayed:
2. Click on the ratio of Gateway and then click on Next>>.
46
Advertisement
Table of Contents
