Roland VERSAUV LEC-300 Setup Manual page 46

Hide thumbs Also See for VERSAUV LEC-300:

Table of Contents

7. Network Settings









In the [Local Area Connection Properties] dialog box, click [OK], then in the [Local Area

Connection Status] dialog box, click [Close].

Click [Properties].

If you're using Windows Vista and the [User Account

Control] dialog box appears, click [Allow].

The [Local Area Connection Properties] dialog box appears.

Select [Internet Protocol Version 4 (TCP/IPv4)] (Win-

dows Vista) or [Internet Protocol (TCP/IP) (Windows

XP/2000), then click [Properties].

If the check box for [Internet Protocol] is unselected,

then click the check box to select it.

Select [Use the following IP address]. Enter the infor-

mation as shown below, then click [OK].

[IP Address]: 192.168.0.XXX

[Subnet Mask]: 255.255.255.0

"XXX" may be any number you want from 1 to 254. However, be sure to

specify a number that does not duplicate a number used for another

computer or device. Here, by way of example, "192.168.0.101" is entered

for the IP address and "255.255.255.0" for the subnet mask.

Table of Contents