Network Interface Errors - Lexmark E120 User Manual

Network interface errors

Light sequence:
•
•
Secondary light sequence:
Press
sequence.
•
•
•
Message:
Printer cannot establish communication with the network.
Solution:
•
•
Host interface disabled
Light sequence:
•
•
Secondary light sequence:
Press
sequence.
•
•
•
•
Message:
Printer USB or network port has been disabled.
Solution:
•
•
Downloaded From ManualsPrinter.com Manuals
Using the operator panels
Continue—On
Error—On
twice quickly to see the secondary light
Continue—On
Paper Jam—On
Error—On
Press to clear message and continue printing. (may not print correctly).
Press and hold to reset printer (may need to send the job again).
Continue—On
Error—On
twice quickly to see the secondary light
Continue—On
Load / Remove Paper—Blinking
Paper Jam—Blinking
Error—On
Press to clear message. The printer discards all jobs previously sent.
Enable the network port by selecting a value other than Disabled for the Network Buffer item in the Local
Printer Setup Utility (see Software and Documentation CD).
Overview of the Lexmark E120n operator panel
Primary light
sequence
Primary light
sequence
38
Secondary light
sequence
Secondary light
sequence