Changing the long-life photoconductor kit
Warning:
1
Open the rear cover by sliding the release button to the right.
2
Remove the long-life photoconductor kit by pulling out on the extended tabs.
Warning:
Downloaded From ManualsPrinter.com Manuals
Supplies information
When replacing the long-life photoconductor kit, do not touch the blue drum. Touching the drum will
contaminate the long-life photoconductor kit and affect print quality.
When rear door is open, be careful not to touch the attached roller. Touching the roller can cause
contamination and affect print quality.
Changing the long-life photoconductor kit
71