Lexmark E120 User Manual page 11

Primary light
sequence
Downloaded From ManualsPrinter.com Manuals
Using the operator panels
Secondary
light sequence
Message
Load media (Ready / Data light blinks once)
Print side two of a duplex job (Ready / Data light blinks once)
Memory full (Ready / Data light blinks three times)
Host interface disabled (Ready / Data light blinks five times)
Jam in the printer paper path (Ready / Data light blinks ten times)
Jam in Tray 1 / priority feeder (Ready / Data light blinks four times)
Short paper (Ready / Data light blinks three times)
Toner low (Ready / Data light blinks eight times)
Replace long-life photoconductor kit (Ready / Data light blinks once)
Service error (secondary Ready / Data light blinks ten times)
Overview of the Lexmark E120 operator panel
11