From A Macintosh Computer - Lexmark E120 User Manual

10
Hold both sides of the print media close to the priority feeder and push into the printer until the media stops.
11
Press the flashing Continue

From a Macintosh computer

1
Click File
2
From the Format for pop-up, choose your Printer.
3
From the Paper Size pop-up, choose your paper size.
4
Click OK.
5
From the computer software application, select File
6
From the Copies & Pages pop-up, choose Paper.
7
From the Paper Type pop-up, choose your paper type.
8
From the Paper pop-up, choose Paper Feed.
9
Select Manual Paper or Manual Envelope as appropriate.
10
Adjust the priority feeder guides to the width of the print media, and make sure the Tray 1 paper cover is in place.
11
Place selected print media with side to be printed facing up, at the center of the priority feeder. If you load more
than one sheet, the stack should rest on the Tray 1 paper cover.
• Hold transparencies by the edges, and avoid touching the print side. Oil from fingers can affect print quality.
• Insert envelopes with the flap side down and return address first. The stamp area will feed through last.
• Load letterhead face up, top of sheet first.
Hold both sides of the print media close to the priority feeder and push into the printer until the media stops.
12
Press Print.
Downloaded From ManualsPrinter.com Manuals
Note: Do not force the print media into feeder. Forcing media causes jams.
button to print the job.
Page Setup.
Printing from the priority feeder
Printing tasks
Print.
60