Sony UPX-C200 Operating Instructions Manual page 8

Digital printing system
Hide thumbs Also See for UPX-C200:
Table of Contents

Advertisement

Synchronized
flash
Recommended modes
RESOLUTION
Select the resolution according to the
print size.
Exposure Mode MANUAL EXPOSURE
Flash Mode
M
(Manual exposure, forced flash)
APERTURE
Open (F4.8: Tele)
SHUTTER
1/250 second is recommended.
EV
If the distance between the subject
Compensation
and the lens is less than 1.5 meters,
adjust EV Compensation toward the
minus direction, and if the distance is
greater, adjust EV Compensation
toward the plus direction. For example,
if the distance is 1.0 meter, set EV
Compensation to around –1.00 EV,
and if the distance is 2.3 meters, set
EV Compensation to around +1.00 EV.
Perform a test-shooting before actual
shooting.
W.B.
One Push or 5500K
(white balance)
AE AREA
The setting does not matter.
8
Functions of the Camera
L
Shooting using an external flash
To obtain the highest possible picture quality, use
several external flashes. In this case, set Exposure Mode
to MANUAL EXPOSURE, and set Flash Mode to
Manual Exposure, No Built-In Flash mode. Connect the
flashes using synchronization cords.
Adjust the power of the external flashes so that the
aperture of the camera becomes open and that EV
Compensation becomes ±0.00 EV. If it is not possible to
adjust the power of the external flashes, use the higher
aperture setting or adjust EV Compensation.
Recommended modes
RESOLUTION
Select the resolution according to the
print size.
Exposure Mode MANUAL EXPOSURE
Flash Mode
M
(Manual exposure, no flash)
APERTURE
Open (F4.8: Tele) is recommended.
Adjust it according to the power of
external flash.
SHUTTER
1/250 second is recommended.
EV
Adjust EV Compensation if the power
Compensation
of external flash cannot be adjusted.
W.B.
Manual or One Push
(white balance)
AE AREA
The setting does not matter.
Flash
L
: Synchronization cord

Advertisement

Table of Contents
loading

Table of Contents