Giving Your Printer A Device Number (My Device Name) - Sony UPX-C200 Operating Instructions Manual

6
Press B of the control button.
7
Press b or B of the control button to select ON or
OFF.
8
Press the EXEC button.
"REBOOTING" is displayed. The printer restarts,
and the setting of the Module Power is changed.
If the setting for Module Power is
changed during connection
If the setting of the Module Power on the
camera is changed
If the Module Power setting of the camera is changed
from ON to OFF, the Bluetooth lamp goes off, and
"Ready BT RSSI [----]" is displayed on the operation
display of the printer.
If the Module Power setting of the camera is changed
from OFF to ON, the Bluetooth lamp lights, and "Ready
BT RSSI [))))]" is displayed on the operation display of
the printer.
If the setting for Module Power on the printer is
changed
If the Module Power setting of the printer is changed
from ON to OFF, the Bluetooth lamp goes off, and
"Ready BT RSSI [----]" is displayed on the operation
display of the printer. The camera treats this printer in
the same way as one whose printer name and Bluetooth
address are displayed in gray.
If the Module Power setting of the printer is changed
from OFF to ON, the Bluetooth lamp lights. To establish
connection between the camera and the printer, press the
PRINT button of the camera for reconnection.
26
Setting the Bluetooth Functions
Giving Your Printer a Device
Number (MY DEVICE NAME)
When two or more printers are used in a system, it is
convenient that each printer have a device number (from
1 to 9).
1
Turn on the printer.
"Ready BT RSSI [----]" appears on the operation
display.
2
Press the MENU button.
3
Press V of the control button to display "Bluetooth
SETTING [>>]."
4
Press B of the control button.
5
Press V of the control button to display "MY
DEVICE NAME [>>]."
6
Press B of the control button.
"Sony UP-DX100 [NONE-9: EXEC]" appears.
7
Press v or V of the control button to set the device
number.
8
Press the EXEC button.
"DEVICE NAME Saving. . ." appears, and the
device number you have set is stored.
9
When the setting is completed, press the MENU
button.