Print Quality Adjustment Of The Printer; Adjusting The Print Quality (Color Adjust) - Sony UPX-C200 Operating Instructions Manual
Digital printing system
Hide thumbs
Also See for UPX-C200:
- Operating instructions manual (208 pages) ,
- Brochure & specs (16 pages) ,
- Brochure & specs (22 pages)
Table of Contents
Advertisement
Print Quality Adjustment
of the Printer
The picture quality for printout can be adjusted using the
Menu functions for the printer. Print-quality adjustment
is available both for color and monochrome pictures.
The results of the adjustment can be checked by using
the Guide Print function of the camera.
Three sets of adjusted values can be stored in memory,
and retrieved for later use. For example, you can store
adjusted values for color printing in memory cell 1 and
those for monochrome print in memory cell 2, and
switch between them when printing.
For details on the meanings of the values for CYN-RED,
MAG-GRN, and YEL-BLU, see “Detailed Explanation
on the Parameters for the Picture Quality Adjustment”
on page 16.
Adjusting the Print Quality
(COLOR ADJUST)
1
2 3
MENU
EXEC
PRINT
1
ALARM
DIGITAL PHOTO PRINTER
6 4 5
1
Turn on the printer.
2
Press the MENU button.
“COLOR ADJUST [>>]” appears.
3
Press B of the control button.
“CYN-RED:” appears.
4
Press b or B of the control button for adjustment.
5
Press V of the control button.
“MAG-GRN:” appears.
Repeat Steps 4 and 5 to make necessary
adjustments. Adjustable content for each
adjustment item is as follows:
CYN-RED: Pressing b gives the picture more
cyan, while pressing B makes it more reddish.
MAG-GRN: Pressing b gives the picture more
magenta, while pressing B makes the picture
more greenish.
YEL-BLU: Pressing b makes the picture more
yellowish, while pressing B makes the picture
more bluish.
DARK: Contrast in the dark areas is adjusted.
Pressing B increases the darkness.
LIGHT: Contrast in the bright areas is adjusted.
Pressing B increases the brightness.
SHARPNESS: Pressing B makes the edges of
objects in a picture sharper.
GAMMA: Pressing b makes the color tone of the
whole picture lighter, while pressing B makes it
deeper.
6
Press the EXEC button when the adjustment is
completed.
The display returns to “COLOR ADJUST [>>].”
7
Press the MENU button.
The display returns to “Ready BT RSSI [----].”
Page 15
Advertisement
Table of Contents
