Operation With Several Printers - Sony UPX-C200 Operating Instructions Manual

Operation with Several Printers

In a system using several printers, the basic operations
are the same as when one printer is used. If the camera
is turned on after a printer is turned on, the camera
automatically searches for registered printers. The
names and Bluetooth addresses of all printers with
which connection has been established are displayed in
black. Those of any printers with which connection has
failed are displayed in gray.
Printers to be used can be selected with the PRINTER
button. When a connected printer is selected, the print
conditions of the selected printer are displayed in white
on the LCD. If a printer that is not connected is selected,
an alarm will be displayed in yellow.
To establish a connection with a currently disconnected
printer, first check that the printer is turned on, and that
the Bluetooth lamp is lit. Then, press the PRINT button.
"Reconnecting. . ." is displayed, and the process of
reconnection starts. When reconnection has been
established, in CAMERA mode, the camera returns to
the normal recording mode. In PLAY or Quick Review
mode, the Layout Preview display is displayed.
To start printing, press the PRINT button again.
Transmission of image data starts.
If printing is not required, press the MENU button to
terminate the Layout Preview display.
30
Setting the Bluetooth Functions