Front Wheel Installation - Honda XL700V Owner's Manual

•
Front Wheel Installation
1. Install the side collars into the left and
right side wheel hub.
Position the front wheel between the
fork legs and insert the front axle bolt
from the right side, through the right
fork leg and wheel hub.
2. Install the axle holder with the UP mark
(1) upward and first tighten the upper
axle holder nuts until lightly seated ,
then tighten the lower axle holder nuts
until lightly seated.
3. Tighten the front axle bolt to the
specified torque.
Front axle bolt torque:
64 N·m (6.5 kgf·m, 47 Ibf·ft)
4. Install the right and left caliper assemblies
to the fork legs and tighten the fixing
bolts to the specified torque:
30 N·m (3.1 kgf·m, 22 Ibf·ft)
5. To avoid damaging the brake pads while
installing the caliper assemblies, carefully fit
both brake discs between the pads.
124
6. Operate the front brake and pump the
fork several times. Check for free wheel
rotation after the brake is released.
Recheck the wheel if the brake drags or
the wheel does not rotate freely.
(1)
(1) UP mark
CD