RIGHT
HANDLEBAR CONTROLS
Engine
Stop Switch
The
engine stop switch (1) is next to
the
throttle grip. When the switch is in
t
he
0
(RUN) position, the engine will
operate.
When the switch is in the
~
(OFF)
position,
the engine will not operate. This
switch
is intended primarily as a safety or
emergency
switch and should normally
remain
in the
0
(RUN) position.
If your motorcycle is stopped with the
ignition
switch ON and the engine stop
switch
~
(OFF), the headlight, position
light,
taillight and license light will still be
on, resulting in battery
discharge.
Start button
The start button (2) is below the engine
stop switch.
The start button is used for starting the
engine. Pushing the button in starts the
engine. See Starting Procedure, page 80.
When the start button is pushed, the
starter motor will crank the engine; the
headlight will automatically go out, but the
position light, taillight and license light will
stay
on.
(1)
Engine
stop switch
(2) Start
button
65