Honda XL700V Owner's Manual page 137

7. Tighten the front axle holder nuts on the
right fork leg to the specified torque:
12 N·m (1 .2 kgf·m, 9 Ibf·ft)
8. Visually check that the clearances
between each surface of the brake disc
(1) and the brake bracket (2) (not the
brake pads) are symmetrical.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
CD
(2)
~~
(1) Brake disk
(2) Brake bracket
(2)
(1)
•
125