Xerox DocumentCentre C400 Series User Manual page 82

5.3 Options
Output Destination
Set the destination for output.
The items that can be selected vary according to whether the optional Side Output Tray or Finisher has been
installed.
Job Offset
Shifting the output positions of adjacent jobs (print command) or copies (sets) is called
Job Offset. The positions of the adjacent jobs or sets of copies are shifted to either
sides of the output tray.
Collated
Select whether to collate a multiple-page file per set when they are printed.
If you operating system is Mac OS X, set Copies & Pages.
Transparency Separators
Specify whether to use transparency separators and the source of the separators, if
selected.
Select Auto for the paper source to automatically feed from the paper tray with paper of
the same size and in the same orientation as transparencies.
5
When using Transparency Separators, be sure to load paper of the same size and in the same orientation
q
as transparencies into the paper tray.
The Transparency Separator function cannot be used in the following situations.
q
When anything other than Tray 5 (Bypass) is selected for Paper Source in the General tab.
q
When anything other than Transparency is selected for the Paper Type (Bypass Tray) in the Printer
q
Specific Options.
When anything other than Center Output Tray is selected for Output Destination.
q
When Print on Both Sides in the Layout tab is selected.
q
Bypass Feed Orientation
Specify the paper orientation when printing from the bypass tray. When you set the
short edge of the paper in the bypass tray feed direction, select Landscape setting.
When you set the long edge of the paper in the bypass tray, select Portrait setting.
Paper Type (Bypass Tray)
Select the type of paper set in the bypass tray when using the bypass tray.
Print Mode
Specify whether to give priority to the print speed or the image quality.
Output Color
Specify whether to print in color or black.
74