Xerox DocumentCentre C400 Series User Manual page 61

Transparency Separators
Specify whether to use transparency separators and the source of the separators, if
selected.
Select Auto for the paper source to automatically feed from the paper tray with paper of
the same size and in the same orientation as transparencies.
When using Transparency Separators, be sure to load paper of the same size and in the same orientation
q
as transparencies into the paper tray.
The Transparency Separators function cannot be used in the following situations.
q
When anything other than Manual Feed is selected for Paper Source in the Paper/Quality tab.
q
When anything other than Transparency is selected for Media in the Paper/Quality tab.
q
When anything other than Center Output Tray is selected for "Output Destination in the Advanced
q
Options" tab.
Bypass Feed Orientation
Specify the paper orientation when printing from the bypass tray. When you set the
short edge of the paper in the bypass tray feed direction, select Landscape setting.
When you set the long edge of the paper in the bypass tray, select Portrait setting.
Image Enhancement
Specify whether to use the Image Enhancement function.
Selecting On smoothes boundaries when printing. This reduces the jagged edges,
thereby artificially increasing the resolution of the image. When printing an image
(bitmap) composed of coarse halftone dots, smooth color gradation is impossible in
certain situations. In this case, select Off.
Draft Mode
Specify whether to reduce the amount of toner used when printing drafts.
When you select On, the overall printed color becomes lighter. This is best for printing
documents when print quality is not necessary.
Stapling
Specify whether to staple printed documents as well as the position of the staple.
You can staple 2 to 30 sheets.
q
You cannot use staples in the following situations.
q
When anything other than Finisher Tray is selected for Output Destination in the Advanced Options tab.
q
When Job Offset is selected.
q
Custom Paper Image Rotation
Specify whether to correct the paper orientation when printing on custom paper.
When printing with custom paper, select On to correct the orientation rotated at 90
degrees.
4.3 Device Options and Print Settings
4
53