Removing The Wireless Lan Module - Clevo W150HRM Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, turn it over, and remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
4. The Wireless LAN module
5
a.
1
b.
2 3
4
(page 2 -
on the mainboard
1
& , and then remove the screw
2 3
(Figure 10c) will pop-up, and you can remove it from the computer
c.
5
5) and the component bay cover
(Figure 10a).
(Figure 10b) .
4
(Figure
d.
5
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 11
Wireless LAN
(page 2 - 9).
Module Removal
a. Locate the WLAN.
10d).
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 10b).

5.Wireless LAN Module
• 1 Screw