Clevo W150HRM Service Manual page 36

Disassembly
4. Carefully lift up the heat sink
5. Turn the release latch
Figure 8
6. Carefully (it may be hot) lift the CPU
Processor Removal
7. See
(cont'd)
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
c. Remove the heat sink.
d. Turn the release latch to
unlock the CPU.
e. Lift the CPU out of the
socket.

Caution
The heat sink, and CPU
area in general, contains
parts which are subject to
high temperatures. Allow
the area time to cool be-
fore removing these parts.

B. Heat Sink
D. CPU
2 - 12 Removing and Installing a Processor
(Figure
B
towards the unlock symbol
C
page 2 - 13 for information on inserting a new CPU.
c.
d.
C
Unlock
7c) off the computer.
, to release the CPU
up out of the socket (Figure 7e).
D
B
e.
(Figure 7d).
D