Stabilizer 1 - LifeGear 97930 Owner's Manual

Step 1
Connect the Sensor Cable II (23) from the Right Handlebar Support (37R) to the Sensor Cable
III (24) from the Stabilizer (2). Attach the Right and Left Handlebar Supports (37R,37L) to the
Stabilizer (2) with six Spring Washers (52) and Bolts (70).
Step 2
Connect the Sensor Cable I (22) from the Handlebar (38) to the Sensor Cable II (23) from the
Right Handlebar Support (37R). Attach the Handlebar (38) to the Right and Left Handlebar
Supports (37R,37L) with six Washers (72), Spring Washers (52), and Bolts (70).
Step 3
Connect the Sensor Cable I (22) and Speed Wires (40) to the wires that come from the
Computer (43). Then attach the Computer (43) onto the Handlebar (38) with four Computer
Knobs (74). Finally, install the Safety Tether Key (44) onto the Computer (43).
8
1
2
3