Accessories - Martin Exterior 1200 Wash User Manual

8.9 Accessories

This section lists the optional accessories available for the Exterior 1200 Wash. You can find an
updated list on the Martin Architectural website at http://www.martin-architectural.com.
Installation instructions are included with all accessories and can also be downloaded from the
Support area of the Martin Architectural website.
Beam shaper lens
A beam shaper lens is available as an optional accessory for Exterior 1200 Wash Narrow and
Medium beam angle models. The beam shaper flattens and widens the beam into an elliptical
shape. It can be rotated manually to adjust the axis of the beam so that a tall vertical or wide
horizontal beam is projected.
5500-4200 K CTC kit
The Color Temperature Control (CTC) kit consists of a dichroic color filter and all parts required
to install it in the lamp/effects module. With the filter fitted, color temperatures are reduced,
giving warmer colors and slightly reduced light output. The shift in color temperatures
corresponds to a reduction from 5500 to 4200 K.
Snoot/barndoor kit
The snoot/barndoor kit consists of plates that can be installed around the Exterior 1200 Wash
front glass using supplied hardware in order to limit beam angle and control light overspill or
glare.