Martin Exterior 1200 Wash User Manual page 35

Luminaire settings
To access the luminaire settings using MUM, click on the Fixture settings button.
DMX ad dre ss, DMX L amp Off an d DMX Rese t se ttin gs
If you intend to operate the Exterior 1200 Wash with a DMX controller, the DMX address
must be set on all luminaires for which individual control is required. If you are not familiar
with the principles of DMX addressing in an installation with multiple fixtures, see "7.1.1:
Setting DMX addresses" on page 50.
It is also a good idea to set the DMX Lamp Off and DMX Reset options. These settings
are described in "7.1: Preparing for DMX control" on page 50.
The other default luminaire settings listed below are suitable for most applications, and it
may not be necessary to change them.
Automatic lamp on
When the Automatic Lamp On personality is On, the luminaire turns on the lamp within
90 seconds of power on. When set to Off (the default setting), a lamp-on command is
required to turn on the lamp.
Luminaire settings 35