Canon WUX5000 User's Manual & Installation Manual page 49

Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 / SX6000) P59)
Computer
Monitor output
terminal
(mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
Computer
Monitor output
terminal
(mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
• A signal with a dot clock higher than 162 MHz cannot be projected.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
• The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Downloaded From projector-manual.com Canon Manuals
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not
included)
BNC cable (not included)
When inputting corresponding audio
Audio cable (not included)
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not
included)
BNC cable (not included)
When inputting corresponding audio
Audio cable (not included)
Connecting the Projector
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not
included)
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not
included)
49
Projector
To ANALOG PC /
COMPONENT IN terminal
To AUDIO IN terminal
Projector
To ANALOG PC-1 /
COMPONENT IN terminal
To AUDIO IN terminal