Reducing Flickering (Wux5000 / Wux4000); Gamma Restore (Wx6000 / Sx6000) - Canon WUX5000 User's Manual & Installation Manual

Setting Various Functions
Reducing Flickering
[Deflicker]
HDMI
Digital PC
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
Off
Deflicker adjustment is not per-
formed.
Adjust Select [Deflicker] to adjust. The fol-
lowing screen appears.
OK
Cancel
• When deflicker is performed, the image
adjustment screen is projected for approx-
imately 20 seconds.
• To cancel deflicker, press the POWER
button.
• Deflicker is a function that decreases
flickering. However, there are some
cases that flickering continues.
• Deflicker can only be used when the
lamp has been on for approximately
30 minutes or longer.
Downloaded From projector-manual.com Canon Manuals
Component
Analog PC
Deflicker is performed.
Deflicker is not performed.
Gamma Restore
[Gamma restore]
HDMI
Digital PC
This function is used when changing and
turning of the tone characteristics and ach-
romatic color is noticed over a long period
of time.
MENU > [System settings] > [Other settings] >
[Gamma restore]
Off
Returns to the factory default with-
out performing Gamma restore.
Adjust
Performs Gamma restore and
applies the result.
OK
Cancel
If Gamma restore is performed, the pro-
jected image will be adjusted for a period
of approximately 150 seconds.
• To stop Gamma restore, press the POWER
button or the EXIT button (WX6000 /
SX6000).
• If Gamma restore is performed, the
tone characteristics and achromatic
color will be restored as close as
possible to the condition when the
unit was purchased, however it is not
possible to restore it completely to
the original condition. So the chang-
ing and turning color cannot be elim-
inated completely.
• Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
134
Component
Analog PC
Gamma Restore is per-
formed.
Gamma Restore is not
performed.