When The Password Input Screen Appears; When "No Signal" Appears; When Notebook Computer Screen Does Not Appear; Adjusting Image - Canon WUX5000 User's Manual & Installation Manual

Starting Projection

■When the Password Input Screen Appears

If you have set a password, the Password input screen appears. Enter your password.
(P128)

■When "No signal" Appears

With a notebook computer, the user must turn on the external monitor output. (P58)
Press the INPUT button to select the input signal. (P60)

■When Notebook Computer Screen Does Not Appear

Set your notebook computer to output signals to an external monitor. For more details,
refer to "Changing Notebook Computer Screen Output" below.

■Adjusting Image

• Set the display resolution of the computer to the highest resolution or the resolution
closest to that setting. (P61)
• Use the auto PC function to adjust shift in computer image or the flickering of the
screen. (P62)
• Use the ZOOM button to adjust the size of the projected image. (P71)
• Use the FOCUS button to correct the focus adjustment if necessary. (P73)
• Use the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button
(WX6000 / SX6000) to adjust keystone correction if necessary. (P76)
• Select the aspect ratio of the projected image (screen aspect) or a screen mode
(aspect) according to the aspect ratio of the screen, type of input image signal etc.
(P63 - P70)
• Select an image mode depending on the projected image. (P78)

Changing Notebook Computer Screen Output

With a notebook computer, the user must turn on the external monitor output on the com-
puter side.
This operation is not required for a desktop computer.

■Turning on External Monitor Output

You can turn on the external monitor output via keyboard operation.
To turn on the external monitor output with most computers, press the function key ([F1] to
[F12]) which is marked with the external monitor icon while holding down the [Fn] key.
• The function key you use and the method used to turn on the external monitor output vary
depending on the model. For details, see the manual for your notebook computer.
• With Windows 7, you can turn on image output by holding down the Windows logo key
and pressing the [P] key.
Downloaded From projector-manual.com Canon Manuals
While pushing key
Press a key such as
58
or .