Skip The Power Button Operation - Canon WUX5000 User's Manual & Installation Manual

Skip the POWER Button
Operation
[Direct power on]
HDMI
Digital PC
You can turn on the projector by connect-
ing the power cable without pressing the
POWER button.
MENU > [System settings] > [Direct power on]
MENU > [System settings] > [Direct power on]
Off
You need to press the POWER button
to turn on the projector.
On
You can turn on the projector by con-
necting the power cable only.
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [Off] is the factory default.
Downloaded From projector-manual.com Canon Manuals
Component
Analog PC
121
Setting Various Functions
• Before setting the direct power on to
[On], be sure to set the [Power man-
agement mode] to [Standby] or
[Exit].
• After turning off the projector, wait at
least 5 minutes before turning it on
again. It may shorten the lamp life if
you turn on the projector immediately
after turning it off.