Lamp Warning Display (Wx6000 / Sx6000); Resetting The Lamp Counter - Canon WUX5000 User's Manual & Installation Manual

Lamp Warning Display
[Lamp warning display]
HDMI
Digital PC
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Off
The lamp warning display is not
displayed.
On
The prepare lamp message and
the lamp warning display are dis-
played.
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is [On].
• Regardless of the [Lamp warning display]
setting, when the lamp replacement time has
been reached, the LAMP indicator on the
projector will flash.
Downloaded From projector-manual.com Canon Manuals
Resetting the Lamp
Counter
Component
[Lamp counter]
Analog PC
You can reset the lamp counter that indi-
cates the time for lamp replacement.
MENU > [System settings] > [Other settings] >
[Lamp counter]
MENU > [System settings] > [Other settings] >
[Lamp counter]
135
Setting Various Functions
HDMI
Digital PC
Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to page 195.
Component
Analog PC