■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page
177. For information about PJLink, refer to
PJLink
PJLink authentication
Password
Confirm password
Downloaded From projector-manual.com Canon Manuals
Item
Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window cannot be
changed.
Select whether to turn the PJLink
authentication function on or off. If
OFF is selected, [Password] and
[Confirm password] cannot be
changed.
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
For confirmation, enter the same
password that you entered in
[Password].
Setting Up the Network
page
174.
Explanation
187
Factory default
setting
ON
ON
system
system